For this type of project, our high-performance monocrystalline modules in 72 and 78 cells TP678M, TP672M and our bifacial modules TP6G60M-9BB, TP6G72M-9BB, TP6E72M, TP6E60M in 60 and 72 cells 5 Busbar or 9 Busbar are perfectly relevant for your photovoltaic ground mounted projects. Discover our new products, the TALESUN TP6L72M Mono Cast modules in 5 or 9 Busbar and our very large modules, in 166mm cells.
All our modules have a 12 year product warranty. Check out all of them below.

HIPRO-TP672M
Monocrystalline 72 cells Module
– Module Monocrystalline 72 cells
– PERC Technology
– Lower temperature coefficients
– High waterproof level

HIPRO-TP678M
Monocrystalline 78 cells Module
– Module Monocrystalline 78 cells
– PERC Technology
– Lower temperature coefficients
– High waterproof level

BIPRO-TP6G60M-9BB
Bifacial Monocrystalline 120 half-cells Module
– Design of 9 busbar solar cells
– Very high power output
– Use in a hostile environment (high humidity, wind, dust)
– Very good Anti-PID performance

BIPRO-TD6G60M-9BB
Bifacial Monocrystalline 120 half-cells Module Glass Glass
– Glass Glass Module
– Design of 9 busbar solar cells
– Very high power output
– Use in a hostile environment (high humidity, wind, dust)

BIPRO-TP6G72M-9BB
Monocrystalline Bifacial 144 half-cells Module
– Design of 9 busbar solar cells
– Bifacial PERC cell technology
– 5 to 25% higher yield
– Use in a hostile environment (high humidity, wind, dust)

BIPRO-TD6G72M-9BB
Monocrystalline Bifacial 144 half-cells Module Glass Glass
– Glass Glass Module
– Design of 9 busbar solar cells
– Bifacial PERC cell technology
– 5 to 25% higher yield

CIPRO-TP6H72M
Mono Cast 144 half-cells Module
– Mono Cast 144 Technology Half-cells
– Design of 5 busbar solar cells
– High efficiency
– Very good Anti-PID performance

CIPRO-TP6F72M-9BB
Mono Cast 144 half-cells 9 Busbar Module
– Mono Cast Technology Half-cells
– Design of 9 busbar solar cells
– High efficiency
– Very good Anti-PID performance

BISTAR TP6L60M
Monocrystalline 120 half-cells 9 Busbar Module
– Design of 120 half solar cells
– Very high power output due to very large 166mm cells
– PERC cell technology
– Use in all circumstances

BISTAR TP6L72M
Monocrystalline 144 half-cells 9 Busbar Module
– Design of 144 half solar cells
– Very high power output due to very large 166mm cells
– PERC cell technology
– Use in all circumstances

BISTAR TP6F72M-9BB
Monocrystalline 144 Mono PERC halfcut cells 9 Busbar Module
– Design of 144 half cut solar cells
– Very high power output
– Half Cut Mono Perc cell technology
– Use in all circumstances

BISTAR TP6F78M
Monocrystalline 156 Half Cells 9 Busbar Module
– Design of 156 half cells Mono PERC
– Very high power output
– Half Cells Mono Perc cell technology
– Use in all circumstances

BIPRO TD6I60M
Monocrystalline Bifacial Glass-Glass 120 half-cells 9 Busbar Module
– Design of 120 half-solar cells 9 busbar
– Very high power output due to very large 166mm cells
– Bifacial PERC cell technology
– Use in all circumstances

TWINCKLE TD672M
Monocrystalline Glass-Glass Mono PERC 72 cells Module
– Design of 72 solar cells
– Bifacial PERC cell technology
– Glass Glass Module
– Use in all circumstances
Projects
Our modules in action
The photovoltaic park on bare land, also called a solar farm or ground mounted photovoltaic installation, concerns land from several hectares to several tens of hectares.
In general, ground parks are large-scale projects, which require significant investments and a consequent and decisive engineering, mainly in the development phase. Developers often sell their photovoltaic parks once the commissioning step is finished or after only a few years of service, with the aim of being in a financial position to launch new developments. The favorable grounds are clear of all other infrastructure, on several hectares, easily accessible and can be fenced.
The selection of a site is also decided according to the connection distance to the source station at which it is located.
Last but not least, during the preliminary examination of a land is analyzed the compatibility of the project with the current urban planning document in the area concerned. The photovoltaic parks do not aim for the occupation of cultivable land, that includes fallow areas, artificial meadows and market gardening and cereal crops.
However, these farms can allow the valuation of land which is not valid for agriculture or not exploited, and always in an ecological manner, without any direct polluting impact, and by limiting their visual impact (brownfield sites, proximity to airports or motorways. , old landfills …)
In addition, these ground mounted photovoltaic installations can fully coexist with extensive sheep farming, beekeeping, small market gardening …
For this type of project, the TALESUN TP678M, TP672M high-performance monocrystalline modules and the TALESUN TP6G60M-9BB, TP6G72M-9BB, TP6E72M, TP6E60M bifacial modules are perfectly suited for ground-mounted photovoltaic installations.